WEB-600
MODELS: WEB-600, WEB-600-O, WEB-600-US,
WEB-600-O-US
SPECIFICATION DATA
FEATURES
•
•
Supports open and legacy protocols.
Web User Interface (standard) serves rich presentation
and live data to a browser.
•
Run stand-alone control, energy management, and
multi-protocol integration.
•
•
Standard and optional communications boards.
Can be expanded with optional 16 and 34 point I/O
Modules.
•
•
Small compact design is easy to install and supports
multiple power options.
®
Embedded IBM Power PC Platform.
GENERAL
APPLICATION
The WEB-600 is a compact, embedded controller/server
platform. It combines integrated control, supervision, data
logging, alarming, scheduling and network management
functions with Internet connectivity and web serving
capabilities in a small, compact platform. The WEB-600
makes it possible to control and manage external devices
over the Internet and present real time information to users in
web-based graphical views.
The WEB-600 is ideal for smaller facilities, remote sites, and
for distributing control and monitoring throughout large
facilities. Optional I/O modules can be plugged in for
applications where local control is required. The WEB-600
controller also supports a wide range of field busses for
connection to remote I/O and stand-alone controllers. In small
facility applications, the WEB-600 controller is all you need for
a complete system.
The WEB-600 is a member of the WEBs-AX™ suite of
®
Java -based controller/server products, software applications
The WEB-600 controller serves data and rich graphical
displays to a standard web browser via an Ethernet LAN or
remotely over the Internet, or dial-up modem. In larger
facilities, multi-building applications and large-scale control
system integrations, WEBStation-AX™ software can be used
to aggregate information (real-time data, history, alarms, etc.)
from large numbers of WEBs-AX™ controllers into a single
unified application. The WEBStation-AX™ Supervisor can
manage global control functions, support data passing over
multiple networks, connect to enterprise level softwa
and tools, which are designed to integrate a variety of devices
and protocols into unified, distributed systems. WEBs-AX™
AX
products are powered by the revolutionary Niagara
®
Framework , the industry's first software technology designed
to integrate diverse systems and devices into a seamless
AX
system. Niagara supports a wide range of protocols
®
®
®
including LONWORKS , BACnet , Modbus , and Internet
AX
®
standards. The Niagara Framework also includes
integrated network management tools to support the design,
configuration, installation and maintenance of interoperable
networks.
74-4067-02
WEB-600
Optional I/O Modules: Table 4 lists the I/O models that can
be connected to the WEB-600. Optionally, IO-16-REM-H
can be connected; details can be found in the data sheet
74-5082.
Removable screw terminals (0.2 in. [5.08 mm] centers) for all
inputs and outputs.
Universal Input types supported:
Type 3 (10K) Thermistors; Thermistor Sensor Range
-10° to +240° F (23° to +116° C). Input accuracy is in the
range of +/-1% of span. Others may be supported by
entering custom non-linear curve interpolation points for
each unique non-linear input.
0 to 10 volt; accuracy is +/- 2% of span, without user
calibration; uses an external resistor for current input
(four provided, mounted by installer on terminal
connections) 4/20 mA current loop; accuracy is +/- 2%
of span, without user calibration; self-powered or board-
powered sensors accepted.
Table 4.
IO-16
WEB-IO-
16
IO-34
WEB-IO-
34
Feature
IO-16-US
IO-34-US
Manufactured in
Universal Inputs
Relay Outputs
Analog Outputs
China
USA
China
USA
8
4
4
16
10
8
Dry contact; V open circuit, 300-uA short-circuit current.
Pulsing dry contact at a rate of up to 20 Hz; 50% duty
cycle.
Dimensions (in
inches)
3.2W x 4.8H x 2.4D 6.3W x 4.8H x 2.4D
Digital Outputs (4 ea.) Pilot Duty.
Form A relay contacts suitable for on/off control only;
floating control not supported.
Dimensions (in
mm)
82W x 122H x 61D 160W x 122H x 61D
Maximum voltage - 30V DC or AC.
1/2 Amp maximum current rating.
Analog Outputs:
Max per WEB-
600 controller
*4 or 2 in combination with IO-34/IO-34-US.
4 / 2*
1
0 -10 Volt DC.
Minimum load supported per output is 2500 ohms
minimum or 4 mA drain maximum.
I/O Specifications - All Modules: Connection to WEB-600
Controller is via a single multi-pin plug.
WEBs–AX™
System Integration
Software Platform
• WEBs–AX Supervisor
• WEBs–AX Enterprise Security
• WEBs–AX Energy Analytics
Internet/Intranet
Web Browser
Ethernet/LAN
HTTP, BACnet, oBIX, SNMP, XML, Fox
Ethernet/LAN
WEB-600 Controller 34 Pt. I/O
Reveal
WEB-600 Controller
WEB-600 Controller
Drives
AHU
Submeter
Submeter
Electricity
Water
Lighting
VAV
CVAHU
HVAC
Submeter
Gas
Smart VAV
Plant Control
Communicating
Thermostat
Compact VFD
WEB-600ARCH PR
November 2010
3
74-4067—02
WEB-600
®
BACnet is a registered trademark of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
(ASHRAE).
®
®
™
IBM and PowerPC are registered trademarks and J9 is a trademark of International Business Machines Corporation.
®
®
JVM and JAVA are registered trademark of Sun Microsystems, Inc.
®
®
LON and LONWORKS are registered trademarks of Echelon Corporation.
®
Modbus is a registered trademark of Schneider Automation, Inc.
AX™
®
Niagara
and the Niagara logo are trademarks and Niagara Framework is a registered trademark of Tridium, Inc.
™
oBix is a trademark of Clinical Computer Systems, Inc.
®
QNX is a registered trademark of QNX Software Systems, Ltd.
™
™
Tradeline , WEBs-AX™ and WEBStation-AX are trademarks of Honeywell International, Inc.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
® U.S. Registered Trademark
© 2010 Honeywell International Inc.
Toronto, Ontario M1V 4Z9
74-4067—02 T.D. Rev. 11-10
Printed in U.S.A.
customer.honeywell.com
|